How To Wash A Convertible Car – Charlotte, NC

Washing a convertible is just as vital as cleaning a standard vehicle, in some ways even more so to properly maintain the seal when it is closed and prevent rips and tears.  The most important thing to do for this process happens even before you put a microfiber cloth in your hand.  Do not even attempt to give your convertible a rinsing if you do not have an appropriate car shampoo that can handle vinyl and various other top materials.

 

 

“What car owners need to keep in mind when using top cleaner is that it cannot be rubbed in by section, as you normally would wash a car… instead, long sweeping streaks with liberal pressure is necessary to keep the chemicals evenly distributed”

 

Ideal Conditions And Tools For The Job

To start, never wash your convertible directly under the sun, and any shaded area is preferable.  Moreover, cooler days to go through this process are recommended so the soap does not dry too quickly and embed into the roof.  Along with the shampoo you are planning to use, ideally it is wise to have three microfiber towels to use.  Obviously not everyone will have this luxury, but numerous towels will help you get the job done to perfection for different phases of the rinsing.

Do Not Overly Shampoo The Top

When mixing warm water and car shampoo in a bucket, make sure there is more liquid than detergent that is added.  The reason for this is that the last thing you want is chemical residue leftover on the top because it will dry the material and cause browning by the sun. Additionally, do not use cleaners that incorporate bleach.  After you have soaked your microfiber towel or vinyl applicator pad, scrub in circular motions starting small and gradually spreading wider until the entire surface is covered in suds.  If you have deep rooted dirt, a brush can be used to scrub as long as it uses soft bristles.  Using a separate towel wet only from water, use the same technique until any dust is clear and the top is regaining its shine.  After it has dried for 10-20 minutes, it is time to incorporate vinyl cleaner.

Apply Convertible Top Cleaner

Once the top has gone through a nice bath, it is a good idea to use another microfiber towel and spray convertible top cleaner on it. Keep in mind that these detergents are usually okay to use on materials beyond just vinyl.  Their application is worthwhile because they are more adept at deeply cleaning the top as opposed to just clearing the surface.  What car owners need to keep in mind when using top cleaner is that it cannot be rubbed in by section, as you normally would wash a car.  Instead, long sweeping streaks with liberal pressure is necessary to keep the chemicals evenly distributed.  It is not a good idea to clean the top by section (as opposed to the body of the vehicle) because it increases the risk of areas fading at different times, which will ruin its appearance.

Vinyl Protectant, Anti-Mildew, And Water Repellant

Once you are satisfied with how your top looks, you can bring various protective properties into the fold with numerous products.  Vinyl protectant can help repel the sun’s rays and ensure color fading is at a minimum.  Mildew resistant sprays will guarantee the vinyl or fabric will not deteriorate quickly, and water repellant will help rain roll off the top and not be absorbed to damage the covering.  No matter which you choose to add to your car, always wait at least 20 minutes before applying a different layer. Finally, with your top sparkling clean and ready for the elements, the rest of the vehicle can be taken care of in small sections of circular motions of car shampoo, before being rinsed and finished off by a smooth sheepskin cloth.

Conclusion

Because there are so many moving parts to washing a convertible, it is a smart move to have it handled by a professional auto detailer.  Not only do they perform the task with effortless expertise, they also have access to a wide array of products to address your particular top.  Moreover, using a professional is recommended because a convertible requires more tools to accomplish the desired results than a standard car wash.

Original article taken from The Detailing Syndicate https://detailingsyndicate.com/how-to-wash-a-convertible-car/

How To Detail A Car Interior – New York City, NY

The interior of your car can become a mess seemingly overnight, and even if you have been consistent in its cleanliness, a thorough detailing is advised to maintain its upkeep. Car cleaning from the inside out is best served by performing tasks from the ground up.  The most successful way to accomplish this is to remove as many loose items as you can in the vehicle.  It goes without saying trash should be eradicated, but it is also wise to take out the car mats and any additional accessories.

 

“Similar to your dashboard and center console, it is smart to clean your windows before getting to the seats, as before, spray the window cleaner into a sheepskin cloth or soft towel… make sure you do not use the same detergent on your windows as you do on the vinyl”

 

Vacuum, Vacuum, Vacuum

Using a Shop Vac or similar device, vacuum as many surfaces as you can as meticulously as possible.  Pay special attention to the areas in between the seats and cracks on the dashboard.  It is even advised to vacuum the roof of the car if you have the means.  Outside of the automobile, vacuum the car mats as well, regardless of if they are plastic or carpet.

Clean Dashboard, Steering Wheel, And Center Console

Using a microfiber towel, wipe each surface after vacuuming to gather up the remaining dust and particles you may have missed.  On the clean side of the towel, spray car interior cleaner and rub each section generously one at a time.  Shampooing your car seats is generally recommended after the fact to pick up the excess cleaner in case it has been sprayed erratically.  You’ll know the vinyl is healthy and
clean when you cannot feel the cleaner on your finger after it has dried.

Spray Your Windows

Similar to your dashboard and center console, it is smart to clean your windows before getting to the seats.  As before, spray the window cleaner into a sheepskin cloth or soft towel.  Make sure you do not use the same detergent on your windows as you do on the vinyl.  Using medium force, rub in the same direction to avoid streaking.  After you have cleared the window and it is sparkling, put your finger under a towel and trace the outline of the window to remove any leftover chemicals.

Shampoo Or Wipe Your Seats

Depending on what your seats are made of, you are going to want to use a shampoo specifically designed for interiors, or vehicle grade upholstery cleaner.  Some shampoos work just fine on upholstery as well, so make sure you check the directions.  Place the foam in a bucket and apply water slowly in a gradual fashion.  Using a brush, cover it in entirely with foam.  The foam is far more important than the liquid because it is what will clean the seats efficiently.  Scrub each seat top to bottom, going over stains more than once if necessary.  It is important to note that as you are cleaning, wipe off the leftover moisture with a terry cloth towel.  No matter what your seats are made of, do not overly soak them.  Outside your vehicle, scrub the car mats as well, and replace them inside after they have dried.  To dry out the interior, use a fan or leave the windows down in a cool, dry place.  By now you will be left with a sleek looking
cabin that smells incredible.

Conclusion

Though car detailing can be done yourself, it is a very time consuming exercise that merits the use of professionals.  These experts will service the interior one section at a time and deliver showroom
quality and preserve its condition for years if done at regular intervals.

Original article taken from The Detailing Syndicate https://detailingsyndicate.com/how-to-detail-a-car-interior/

How To Clean Car Vinyl Dashboard – Newark, NJ

There are numerous reasons cleaning the vinyl dashboard in your car is recommended, whether it be for increasing its value or just visually improving its aesthetic.  The amount of force and type of cleaners used matter greatly so you do not do more harm than good when it is all said and done.

Have The Proper Tools

While wiping a tissue over vinyl may clear the surface initially, this will provide zero protection and not help in restoration either.  Having the right pieces to help you along will make the process worthwhile.  Having a low suction vacuum is recommended, but not a deal breaker.  Some dashboards are more awkward in their shape than others, so a solid vacuum is effective.  In addition, it is always a good idea to have a few microfiber towels on hand.  Not only are these great for applying cleaners, they are soft and very forgiving on these surfaces.  Finally, having the right ingredients in your vinyl cleaner is crucial.  You always want to avoid brands that use alcohols or anything petroleum based, as they will leave a greasy residue even after it has been rubbed in.

 

“Spraying a dashboard directly will create unwanted streaks, as well as have the mist end up on your windows, center console and steering wheel… these chemicals will make these additional areas harder to clean later”

Vacuum The Vinyl

Using either a Shop Vac or Dustbuster, vacuum the vinyl on your dashboard to get rid of the dust and dirt that has accumulated.  This is especially important in areas where they vinyl is wrapped and there
are cracks and crevices present.

Never Spray Directly On The Dashboard

When you feel the surface is clean enough to wipe cleaner onto, spray or apply the substance to a microfiber towel.  Spraying a dashboard directly will create unwanted streaks, as well as have the mist end up on your windows, center console and steering wheel.  These chemicals will make these additional areas harder to clean later.  When applying medium pressure on the towel, rub in tiny circular sections until all of the vinyl has been addressed.  It should begin to appear shiny and be smooth to the touch.  After the cleaner of your choice has dried entirely after 20-30 minutes, do a final wipe down of the dash with your towel to promote its healthy finish.

Cleaning On A Budget

If you do not have access to detergent, a vacuum, or a microfiber towel, you can still do a serviceable job for your dashboard until you can let a professional take care of it.  Using soapy cool water in a spray bottle can suffice if handled carefully.  If you have the choice between a cloth or paper towels for wiping, the cloth is typically recommended.  The more abrasive the applicator, the less successful the process will be.  If you come across deeply embedded dirt, a soft bristled toothbrush can lift up the debris efficiently.

Conclusion

No matter how much time you spend on the interior of your vehicle, professional car detailers are the most foolproof plan to protect and restore your vinyl.  Mixing their ingenuity and knowledge in conjunction with technique, they can make any dashboard look as if it is brand new.  Additionally, these pros are experts at spotting potential vinyl cracking problems and solving them before they become an issue.

Original article taken from The Detailing Syndicate https://detailingsyndicate.com/how-to-clean-car-vinyl-dashboard/

How Do You Shampoo Car Seats? – Buffalo, NY

Car seats can acquire filth and deep stains over time that need to be eradicated to eliminate foul odors and positively change a less than appealing interior.  Shampooing them is a cumbersome but worthwhile process that takes some time and patience.  What your seats are made out of will help you decide what chemicals you will use, but foams and cleaners can typically be used on most upholstery.  The cardinal sin you can do when you shampoo is to use a cleaner that is not designed for seats.  These detergents can embed in the fabric and not wash them completely, if all all.

 

“Shampooing seats without vacuuming them will only trap the dirt, and when moisture comes into contact with dust it will make a runny, dark discharge”

 

Less Is More In A Foam Filled Bucket

Apply the foam or cleaner into a bucket and add water in small amounts at a time.  Most people who have never shampooed their seats before frequently make the mistake of putting in too much liquid.  The gel and foamy suds are what you really want to work with.

Vacuum Anywhere You Plan To Wash

In truth, the whole interior of the car should be vacuumed freely before a shampooing, but if nothing else get deep into the cracks and in between the seats.  Shampooing seats without vacuuming them will
only trap the dirt, and when moisture comes into contact with dust it will make a runny, dark discharge.

Use The Most Effective Tools

Bristled brushes are highly recommended for shampooing because they respond positively to a myriad of fabrics.  They are also better at getting to the root of the material and wiping foreign debris.  If you
have leather seats, a microfiber towel is especially important because residue will build up and need to be wiped cleanly.  Fabric seats necessitate a terry cloth towel, that has the ability to absorb liquid quickly.

Foam With Circular Motions

When you place the foam or gel on your brush, skim the top in the bucket as if you are combing it.  Too much liquid will spread the dirt on seats instead of lift it.  Start with minimal foam, and use more the deeper the stain.  Rub in circular motions, unless creases force you to wipe in long strokes.  If you are dealing with stubborn stains, go over the same spot numerous times.  If it is still not coming out, go through the drying process and begin again, as the dry particles may flake and be easier to rub off another time through.

Dry With Towels And Fans

Soaking excess water should be done with a terry cloth as you go.  Even if the seats do not feel damp after the foam application, at worst air dry them with the windows down.  A strategically placed fan
is a good idea to make sure spots like where you sit do not soak like a sponge.

Conclusion

Shampooing car seats is not something that should be done in a matter of minutes if you are truly seeking to make them smell and appear brand new.  Professional car detailers have the ability to go section by section and restore them to match dealership quality.  With precision and attention to detail, no matter what the upholstery, each seat can be bolstered greatly by the proper technician and cleaners.

Original article taken from The Detailing Syndicate https://detailingsyndicate.com/how-do-you-shampoo-car-seats/

Best Way To Protect Car Paint – Manchester, NH

Car paint does not just embody the appearance of your vehicle, it is also very important to promoting the longevity of the exterior as well.  Each paint job is tough when it is first applied, but over time it can deteriorate just as much as any other area.  There are certain steps automobile owners can take to guarantee that the finish is protected to the best of your abilities.

 

 

 

“While polishing a car is certainly merited, it would behoove you to decipher the difference between this action and waxing.  Polishing is worthwhile in eradicating minor scuffs and scratches, but it will not generate a protective layer over the paint itself.  This process is done through meticulous waxing, which is a sealant that traps positive detergents and cleaners underneath a thin layer of film”

 

Car Detailing Clay Begins The Process

Detailing clay for vehicles is a terrific tool to start the protection process for car paint.  This substance, when rubbed evenly with a liberal amount of force, removes foreign components that do not bond well with paint.  The reason why its usage is so rewarding is because it delves deep into the finish to literally ‘clean’ the paint from the inside out.  It is also easy to apply and relatively inexpensive to acquire.

Regularly Rinse The Surface

It is vital to understand that paint can be corrupted by several outside forces, with the sun’s UV rays and aerial contaminants being most prominent.  Because of this, having a solid defense to combat them is necessary.  If nothing else, washing your car routinely will help the integrity of the paint.  Not all of us have the luxury or budget to apply cleaners and detergents, but even a simple rinsing with the garden hose can suffice in a bind.  Dust and debris adversely affect a car’s finish because it disrupts the bond of the paint.

Store In A Covered Area

It cannot be measured how advantageous it is to have your ride parked in a covered or shaded space.  Being out of the sunlight and inclement weather like excessive moisture can add years of life to your paint job.  Even though the surface of cars is resistant to water, and to a lesser extent UV rays, it does not mean it is an impenetrable force.  These rays from the sun are just as damaging to a painted body as they are to human skin.  It causes paint to flake and brown out, as you often see on vehicles in junkyards that are constantly exposed outdoors.  Though a covered area only works so long, it is a solid
start if you want to protect the paint initially.

Wax Over Polish

While polishing a car is certainly merited, it would behoove you to decipher the difference between this action and waxing.  Polishing is worthwhile in eradicating minor scuffs and scratches, but it will not
generate a protective layer over the paint itself.  This process is done through meticulous waxing, which is a sealant that traps positive detergents and cleaners underneath a thin layer of film.

Conclusion

The truth of the matter is there is no perfect way to protect car paint, however utilizing the expertise of professional detailers will increase the number of years it remains intact dramatically.  Through style, technique, and access to the best chemicals developed for cars on the planet, these professionals take care of business in a precise and thorough manner.

Original article taken from The Detailing Syndicate https://detailingsyndicate.com/best-way-to-protect-car-paint/

How Long Is Car Wax Good For? – Reno City, NV

Car wax is the most vital layer on your vehicle to maintain its integrity and repel the sun’s rays, and as such it is a process that should be done routinely to ensure the elements do not wear out its structure.  Because the amount of wax used and the techniques put into motion when applied vary, it is confusing and frustrating for car owners to know just how long each coat lasts.  There are numerous factors at play in determining how long a car wax is good for, and a few of them include:

 

“Some high grade synthetics can work their magic for 6 months to a year, but they come with plenty of caveats… for wax to have positive effects for such a long time period, the age of the paint job and how often the car has been washed are pertinent”

 

How Your Car Is Stored

Wax reaches its full potential when an automobile is in a garage or in the shade, shielding it from inclement weather.  Besides things like rain, the exposure just sitting outside limits how long a wax can last.  If your last waxing was applied correctly, it should be able to do its job for a few months.

Synthetic Vs. Carnauba Wax

The type of your wax is also integral in its longevity.  Synthetic polymers last much longer than carnauba wax because they seal more effectively.  They only use man made ingredients which is why they promote a high gloss finish.  Carnauba is natural and is more reflective.  The components in carnauba are more susceptible to UV rays and should be reapplied every month or two.

Some high grade synthetics can work their magic for 6 months to a year, but they come with plenty of caveats.  For wax to have positive effects for such a long time period, the age of the paint job and how often the car has been washed are pertinent.  It seems counter-intuitive that the number of washes a vehicle goes through correlates to a wax’s life cycle, but even though they will make your car sparkle, each time will deteriorate the layer you previously applied.

How The Waxing Was Conducted

Using your hand as opposed to a random motion orbiter or a similar machine will directly impact how long wax will be efficient.  Even if you are steady and thorough in your rubbing techniques, wax is unpredictable because it is difficult to spread evenly.  Incorporating a machine to cover a car can buy you about 4 months on average before it is time to address the problem again.

Use The Eye Test

Car wax is still doing its job if you can visually see rain or moisture bead up on the exterior of your vehicle.  Water should roll off of your car effortlessly, instead of looking like you just drove out of a car wash.  If you begin to notice that liquid is taking longer to dry than normal or it doesn’t evaporate entirely, that means it is a good time to have a fresh coat applied.

Conclusion

Even if you have high end wax currently on your automobile, it is recommended to get a fresh coat every 1 to 2 months.  Not only does this keep the body’s beautiful reflection, it also hardens and creates a solid layer to ward off contaminants.  To get the perfect waxing, professional car detailers represent the most intelligent choice to select the proper type of wax for your specific model and distribute it flawlessly when applied.

Original article taken from The Detailing Syndicate https://detailingsyndicate.com/how-long-is-car-wax-good-for/

How To Make A Paint Job Shine – Las Vegas, NV

The paint job on vehicles serve as not just the aesthetic of our ride, but an extension of each driver’s personality as well.  More importantly, the protection of paint is integral to maintaining the health of the body.  All too often, a car’s finish is left by the wayside, allowing the automobile to deteriorate far faster than it has to.  Keeping paint work sparkling is advantageous to both its appearance and the consistency of the structure as well.  So what is the best way to accomplish a flawless shine?

 

“Car detailing clay is a terrific tool to have in your back pocket and works wonders in promoting a glowing shine.  Glide a bar of clay over the body of the vehicle, being sure to pay special attention to areas that are nicked and scratched.  The use of clay is terrific for paint because it removes contaminants that can compromise its integrity over time”

 

Step 1 – Wash Carefully

Most people think a car wash is the first, last and only way to make paint stand out.  Nothing could be further from the truth, as a clean car is essentially just a band-aid in the process.  Still, its importance cannot be measured, because a thorough rinsing prepares the vehicle for a complete detailing.  Using either a pressure washer or soap and sponge, clear any debris that is circumventing your paint from being exposed.

Step 2 – Use Car Detailing Clay

Car detailing clay is a terrific tool to have in your back pocket and works wonders in promoting a glowing shine.  Glide a bar of clay over the body of the vehicle, being sure to pay special attention to areas that are nicked and scratched.  The use of clay is terrific for paint because it removes contaminants that can compromise its integrity over time. 

Step 3 – Systematically Polish By Section

Polishing your car by section; which means rubbing in small areas one spot at a time, will begin to bring a gloss to your paint as well as get the surface ready for wax.  Wax is the bread and butter of the operation, because it encases all the work you have done on the body.  That said, a solid polish is a task you do not want to skip over.  Polishing is a fruitful endeavor because it eliminates problems that an extensive wash can’t even penetrate, such as grease stains and scrapes.  No matter how strong your pressure washer is, no amount of water in the world can solve a deep scratch.  Polish on the other hand is effective at buffing out problematic regions and making a finish look uniform.  But how does this make a paint job shine?

Step 4 – Seal, Shimmer, And Shine!

Polishing allows applying car wax to add reflective properties to your car.  This is exactly what owners want because the wax makes each surface respond better to the sun’s light.  Incorporate car wax slowly into your clear coat the same as you performed your polish.  The wax will start to bond with the paint and create a solid seal to protect it from outside forces.  More pertinent to its appearance however, a good wax will allow you to see your reflection in the paint, signaling to you that significant restoration has taken place.

Conclusion

Maximizing the sleek first impression and longevity of a paint job is best left to professional detailers who can use their training to help your particular make and model.  Every paint finish is different, and requires a focused, experienced hand to deliver a new level of brightness on your finish. Reach out to our Las Vegas, NV, team to discover how we can swiftly take you vehicle aesthetics to the next level.

Original article taken from The Detailing Syndicate https://detailingsyndicate.com/how-to-make-a-paint-job-shine/

What Does A Detailer Do At A Car Dealership? – Omaha, NE

Car detailers are one of the most misunderstood, and underused professions available to vehicle owners.  A large group of people assume the job is nothing more than basic washing and waxing on a particular automobile.  The truth of the matter is that these professionals are experts at their craft in delivering efficient, quality work on cars in a swift amount of time.  Moreover, detailers often save customers money over time by performing tasks that make cars last longer and require less maintenance in the future.  But what exactly do these experts do?

 

“Detailers are essentially car beauticians, focusing their effort on restoration and resilience of the automobile.  This is accomplished by them undertaking worthwhile exercises like polishing and waxing, in addition to a multitude of others”

 

Inspection

Undertaking a thorough inspection of every vehicle they come across is in a detailer’s DNA.  This means meticulously addressing the issues raised by the owner, while additionally searching for potential problems on their own.  This is not a ‘one size fits all’ type of duty, as every make and model requires a specific regiment to that one automobile.  If nothing else, detailers provide a different set of eyes to evaluate what your car may need and why.

Cleaning With Confidence

We have all done the gas station cleaning, throwing away everything under our seats and giving the vehicle’s body a generic spray.  Professionals at dealerships handle this process with a completely different set of rules and standards.  Things like shampooing carpets, restoring upholstery, applying a waterless car wash, and improving your finish are all things that cannot be accomplished at their best without help.  Using an approach that is precise and thorough, detailers use a system to treat each ride with the same amount of respect and attention they give their own.

Make Your Engine Purr

The heart of your car, engines need maintenance just as much as the parts on the exterior.  Pros examine, fix, clean, and sometimes even shampoo them, all in an effort to make your driving as smooth as possible.  Even if you are well versed on their inner workings, detailers have access to the cleaners, solvents, and tools to make engines run with a renewed level of power.

Maintain The Finish

Detailers are essentially car beauticians, focusing their effort on restoration and resilience of the automobile.  This is accomplished by them undertaking worthwhile exercises like polishing and waxing, in addition to a multitude of others.  For those that think these can be accomplished successfully on their own, it would behoove them to research just how much value these pros add.  Your car is as good as how well you manage it, and it can only make a positive statement at its best.  Buffing, rinsing and shining with a trained eye can make vehicles look fresh off the lot.

Conclusion

Besides their expertise, detailers do far more than flex their automotive muscle.  They educate customers in a helpful, understanding matter, and assist needs with recommendations.  In short, they are the bridge between a standard vehicle, and one that has maximized its potential.  The art of detailing is like putting your car’s aesthetics and maintenance on steroids.  Moreover, with mobile teams like ours, there is not need for you to a dealership to get your vehicle detailed. Simply give us a call and we’ll come to you!

Original article taken from The Detailing Syndicate https://detailingsyndicate.com/what-does-a-detailer-do-at-a-car-dealership/

How Do Car Waxes Work? – Billings, MT

We all have seen the illustrious shimmer and reflective shine after car wax has been applied, but what is the science behind how they work?  For starters, it should be mentioned that waxes are not successful unless the vehicle has been thoroughly rinsed and washed first.  Polishing is also advantageous for waxes to perform their duty, but it is not an absolute that this task is done beforehand.  A debris-free, polished car allows wax to make a ‘clean seal,’ meaning that everything that it encases are positive chemicals and properties.  But what does this paste, foam and spray do?

A Shield From Danger

Car waxes work by creating a layer between the clear coat of paint on your vehicle to the elements and outside world.  If you have ever felt wax, in any form, the texture is smooth but tough, as it is filled with oils and solvents.  Though the ingredients vary greatly, a similar product to compare it to is sunscreen.  Sunscreen uses oils and deflective properties to divert sunlight from our bodies.  Car waxes work the exact same way, albeit through the incorporation of polymers and carnauba, depending on the brand.  Regardless of which type of wax it is, the goal is the same: form a durable barrier to withstand unwanted impurities.  These enemies of cars include pollution and the sun’s UV rays, among others.

 

“Car waxes work by creating a layer between the clear coat of paint on your vehicle to the elements and outside world.  If you have ever felt wax, in any form, the texture is smooth but tough, as it is filled with oils and solvents”

 

What Is Taking Place When Wax Is Rubbed In?

Besides the obvious visual of substance on your hood and body, car wax is bonding with your paint finish to enhance its integrity.  A thin film of synthetic polymers or carnauba is ‘setting’ to reflect the sun away from the automobile while promoting the health of its shine.  This is the reason why vehicles look wet and mirror-like after its application.  Perhaps more importantly, waxing is making the vehicle’s surface hydrophobic, so water and moisture cannot penetrate the exterior.  Without getting overly technical, the molecules in wax are non-polar, which is the opposite of water, which harbor asymmetric particles that cling to dirt.  The combative polarity between the two is exactly what car owners want, so when water comes into contact with the wax, it has met its match and beads up and rolls off effortlessly. 

Fills In The Gaps

Ever wonder why your paint finish looks so incredible after a waxing?  The paste or foam that has been spread using an applicator pad is actually revitalizing the body by filling in imperfections and minor scratches.  Essentially it is making the paint appear at its best, given the current condition it is in.  This is why numerous thin layers of waxing is encouraged, because it is providing a more meticulous cover for the impurities every vehicle comes across eventually. 

Conclusion

A final word of caution about waxing is there is, in fact, a wrong way of using it.  Too much wax will actually damage the finish, especially if it has been buffed too hard.  This has the opposite intended effect, as it will gray out the paint and cause it to fade.  Because of this, it is wise to let professional auto detailers in Billings – MT work their magic and deliver a waxing you and your vehicle deserve.

Original article taken from The Detailing Syndicate https://detailingsyndicate.com/how-do-car-waxes-work/

How To Wax Car At Home – St. Louis, MO

If having your car freshly waxed is your endgame, be prepared to put in the time to do it properly, as multiple steps need to be taken before you apply the liquid or foam.  So how can you wax your car from home successfully?

Pressure Wash The Exterior

A simple garden hose will suffice, but using a pressure washer to pre-soak your vehicle is recommended.  The reason for this is because the power from these machines will be twice as effective at removing bugs and surface level dirt.  Plenty of hoses can handle this, but since you will be waxing eventually, it is going to take you a longer period of time to spray because the body needs to be debris-free.

 

“Polishing your car will get rid of things like scratching and greasy patches that using water will never be able to solve. Why is this important?  Because wax is a sealant, if the surface is not completely smooth, it will literally trap the unwanted components under a layer of film”

 

Polish Your Car

Wait!  If you want to wax, why do you need to polish?  The reason is simple: a car wash is just for rinsing, not a thorough cleaning.  Polishing your car will get rid of things like scratching and greasy patches that using water will never be able to solve.  Why is this important?  Because wax is a sealant, if the surface is not completely smooth, it will literally trap the unwanted components under a layer of film.  This means that you are not protecting your car, but the dirt on it instead.  To polish your car effectively, make use of a microfiber cloth, or buffing apparatus.  The goal is to make the paint smooth and exposed to fresh air so the wax can bond with it effortlessly.

Cooler Setting Is Preferred

You will know your car is ready for wax when your exterior is free from everything you do not want encased in the product.  When you are ready to proceed, put your vehicle in a cool, covered environment, if possible.  In extremely hot temperatures, wax dries almost instantly, which is not advantageous because you do not have time to spread it evenly.  The result is a disjointed shine, with half of the car reflecting more light than the other.  Waxing in sunlight can also leave unwanted residue on the surface, which will completely undo all the work you put in polishing the vehicle.

Choosing The Right Wax

There are plenty of opinionated car owners on this subject, but the science behind each type of wax will let you know the proper fit for you.  For starters, if you are waxing with a spray, this is much easier to apply, but it will not last as long.  If you only need a temporary fix, this liquid is fast and easy.  Cleaner based waxes are the cheapest on the market, and you get what you pay for.  They can be worthwhile, but if you apply too much it will disrupt the clear coat on your automobile.  Waxes with carnauba in them are more forgiving to a car’s exterior, and will create a solid barrier to withstand damage from the elements.

Wax By Section

Using an applicator pad, rub in the wax by section on your car.  Breaking your vehicle down to smaller areas will make sure you are more controlled in how much wax you are applying overall.  It also makes how you disperse it more even.  Once the entire car has been serviced, wait the allotted time the wax manufacturer recommends, then use a microfiber towel to wipe away any excess residue that built up too much in a particular region.  Voila!  A fresh, shiny, and most importantly protected car, is your result.

Conclusion

Waxing is integral to car maintenance, but being uninformed in its application can ruin the primer on your body as well as eventually the paint job’s integrity.  Because of this, using an experienced auto detailer is in your best interest to make sure your wax job is long lasting and efficient. Get in touch with our dedicated team of professionals in St. Louis, MO to learn more about how a professional detail can benefit your vehicle.

Original article taken from The Detailing Syndicate https://detailingsyndicate.com/how-to-wax-car-at-home/

How To Car Wax And Polish – Kansas City, MO

Waxing and polishing your vehicle is one of the most fun exercises owners can undertake with their ride because the results are noticeable and provide instant gratification.  That being said, to complete each task successfully, you ought to allot ample time for the cleaners and chemicals to do as they are supposed to.  Rushing a polish, and particularly a waxing, will actually result in damage because you could be adversely affecting the primer.  So how do you apply a wax and polish that leaves your car looking amazing?

Rinse With Warm Water

Using a detergent that is approved for automobiles, apply it using a giant sponge so the suds build up.  Soapy cleaners are recommended because they help loosen up dust and pollution that has made a home on your car’s body.  Using warm water, rinse off each section thoroughly, starting from the top on down to the wheels.  This will make sure chemical residue that remains is at a minimum.  The main goal of a wash in preparing it for a polishing is to get rid of the components that do not make the surface area smooth.  Things like bugs or sand are good examples of this.

 

“Placing wax on the body is an enjoyable experience because you will begin to see a mirror-like reflection that looks healthy and strong… The wax will encase the positive properties of the polish you applied in a thin film that is durable and UV resistant”

 

Shade Is Your Friend For Polish And Waxing

Since you are going to want an area removed from the sun for waxing anyway, place your vehicle in a covered or shade filled area.  This is far more important than you may realize, as the sun’s rays will make the compounds dry too quickly.  The result is a dull finish with uneven texture and light reflection.

Picking The Right Pad

Before you polish, you need to choose the right applicator pad.  The reason why this matters is because the darker your paint job is, the more noticeable swirling lines are.  Always remember that a softer pad will be needed for these vehicles. 

Keep The Pad Damp With Polish And Wipe By Section

When you apply your polish to the pad, make sure enough is on there that at minimum there are no dry spots.  Dry areas on an applicator burn the clear coating on your vehicle.  Next, by dividing your car into manageable sections, wipe the polish in a circular fashion.  This can also be done with a buffer, however do not press too hard to the finish.  At first the polish will smear and appear cloudy, but once it starts to dissipate and the paint appears brighter, it is time to move to the next area.

Seal Your Efforts

Placing wax on the body is an enjoyable experience because you will begin to see a mirror-like reflection that looks healthy and strong.  Using a different applicator pad than the polish, use a high grade wax and rub it in by section, just as you did previously.  Make sure every inch of the car is serviced.  The wax will encase the positive properties of the polish you applied in a thin film that is durable and UV resistant. After the wax has dried, it is time to clean up any leftover residue.  You will know the wax is dry if you rub your finger over it and it does not smear.  Using a microfiber towel, carefully swipe the surface until the entire vehicle looks as if it is glowing.

Conclusion

Polishing and waxing a car is one of the most valuable projects you can do for its sticker price and appearance, and as such, should be left to auto detailing professionals who are knowledgeable and effective in its craft.  With the right experts in Kansas City, MO, handling both of these processes, your automobile’s value will spike exponentially.

Original article taken from The Detailing Syndicate https://detailingsyndicate.com/how-to-car-wax-and-polish/

How Headlight Restoration Works – Detroit,MI

Headlight restoration is a meticulously orchestrated process that brings back the beam’s integrity in numerous stages.  The first stage is clearing the surface, followed by various levels of sanding, and rounding out with a polish and sealant.

Prep Each Light

To make sure the task is successful overall, you must first work to clean the polycarbonate plastic that headlights are manufactured with.  This includes scraping things like bugs and lodged debris.  The purpose of this, beyond not wanting to look at the grime, is that it prepares the surface for a major sanding.

 

“It is a myth that sandpaper cannot be used on plastic, in fact it is necessary since polycarbonate resists scratching to a certain point, unless the damage is so severe that total replacement is prudent”

 

Smooth Equals Results

The goal of sanding the headlights is to make each lamp as smooth as possible.  The smoother the surface, the easier the forthcoming polish will bind to the plastic and give it that desired luster.  While a single grit of sandpaper can be used, incorporating a 400, 600 and 2000 sheet will maximize the results.  Lower grits have more abrasive surfaces, which is why you want to start with them because you are disrupting the hardest layer that has encased the beams.  Sandpaper, mixed with a splash of water to make wiping easier, begins to restore headlights by eradicating a firm film that has been caused by the UV rays of the sun.  Exposure from the elements makes them foggy and brittle to the touch.  It is a myth that sandpaper cannot be used on plastic, in fact it is necessary since polycarbonate resists scratching to a certain point, unless the damage is so severe that total replacement is prudent.

Buff, Wipe, And Shine

The atmospheric chemicals that have laid to rest on your headlights need to be disturbed as they have made them oxidized and prone to cloudiness.  This can be accomplished by using toothpaste, or a car grade polishing compound.  Using an applicator pad on a buffer works tremendously for this stage, and around this time you will begin to see the original appearance of the headlight.  What is taking place are the ingredients in the polish and toothpaste are breaking up the bonded debris, allowing clear plastic to once again see the light of day.  Using an automotive sponge can also solve this by wiping in circular motions starting from the middle of the lamp and working your way out.

Seal With Assurance

A flawless reflection in the plastic means the restoration is nearly complete.  To ward off UV rays in the future, use a car wax, particularly ones specializing in covering polycarbonate.  This is not an absolute must, but if this is listed on the cleaner’s bottle it is a huge bonus.  It is advantageous to apply the wax with either a microfiber towel or sheepskin cloth where there is little resistance and the solution rolls in seamlessly.

Conclusion

Headlight restoration works by mixing preparation with the right cleaners and application devices to rid each one of damage effectively.  Sometimes this deterioration is not even noticeable, however after the surface has been sanded and rubbed, the result is a healthy beam that looks brand new.  Since there are at least 3 different high grade detergents necessary for the best headlight recovery available, it is highly recommended to let professionals detail them so they will retain positive results much longer before they need attention again. To learn more visit The Detailing Syndicate – Detroit,MI.

Original article taken from The Detailing Syndicate https://detailingsyndicate.com/how-headlight-restoration-works/

How To Clean Car Windows Without Streaks – Portland, ME

Cleaning car windows is important not just for aesthetic purposes, but to increase the vision capability of the driver.  This is particularly pertinent to view blind spot angles, which are more dangerous than others.  Even though it seems easy to wash a window without leaving streaks, often after cleaner has been applied, the leftover residue actually makes the glass look worse than before.  With the proper steps and technique, you can make your windows shiny and crystal clear without those frustrating leftover lines.

 

“Spray your window cleaner into a microfiber cloth…the use of microfiber or sheepskin cloth is crucial because it actually eliminates most of the liquid streaking for you as you wipe”  

 

Pre-Wash Each Window

Using a hose or power washer, soak every window generously at a distance of about two feet away.  The purpose of this task is to loosen dirt and eradicate bugs and foreign debris.  Window cleaner is utilized to restore glass, but this will prove ineffective if the surface is not cleared first.

Microfiber Is Your Friend

Spray your window cleaner into a microfiber cloth.  The use of microfiber or sheepskin cloth is crucial because it actually eliminates most of the liquid streaking for you as you wipe.  The reason for this is because the surface blends well with glass, giving it a soft, even sparkle.  While you are able to use a rag, the contours of its design will work against you and you will have to consistently go over the same areas to get rid of excess chemicals.

Use Technique In Your Favor

When you are rubbing your microfiber cloth, first go in a vertical pattern across the entire window, then in a horizontal one.  The towel will take care of most of the streaking, but if done quickly with some residue remaining, it will be pushed to the edges of the glass.  After your windows are shiny enough to see a perfect reflection out of, place one finger under the cloth and trace the shape of the window to eliminate any extra liquid.  Squeegees can also be used if you want an even line, however you will still need to use your trusty cloth to shore up the path it creates.

Clean The Interior With Precision

When washing the inside of your windows, never spray the liquid directly on the glass.  Not only will it induce more streaking as it rolls downward, additional chemicals can cover your upholstery.  Using the same technique as on the exterior, wipe up and down and then side to side to have each window perfectly restored.

UV Protection Will Prevent Future Streaks

A bonus tip when cleaning your windows is to use cleaner that has UV resistant properties.  The reason for this is that rays from the sun place a fine film on glass over time.  Though not visible to the naked eye, this deterioration makes windows rough to the touch.  These impurities promote streaking because the glass itself is not smooth.

Conclusion

Professional auto detailers are experts at making your windows streak resistant, and among all of the other enhancements they can provide, should really be the ones taking care of business on your vehicle.  In addition to making glass appear brand new, they have the ability to completely overhaul your car to reach showroom level quality.

Original article taken from The Detailing Syndicate https://detailingsyndicate.com/how-to-clean-car-windows-without-streaks/

How Long Should Car Wax Sit? Boston, MA

Car wax is the defender from your car’s exterior cracking, fading, or rusting over time.  Not only is it magnificent at restoring a diminishing shine and protecting your paint job, it helps add years of life to your automobile overall.  After car wax is applied, it needs to sit and ‘rest’ before any additional components are added to the vehicle.  It is wise to wax your car with numerous coats, and this will add time to each grace period.  So what factors determine how long car wax should sit?

 

“Though not universal, liquid car wax does not typically embed into a paint job as well as substance wax…. Because of this, liquid wax evaporates faster and requires less rest time”

 

Condition Of The Vehicle

To be clear, a wet automobile should never have wax used on it until it has dried for at least an hour.  If this rule is ignored, the wax will be sitting far longer because the water will have diluted the substance.  This is an unwanted outcome for two reasons: the first of which is because you will have to reapply the wax, and the second that it will double the amount of time the wax will need to sit the second time.

Environment Where The Wax Was Applied

Car wax should be placed on a car that is in the shade.  In the sun, after it has been applied, while it is resting it can get blotchy and force you to redo the process.  The more controlled your environment
is, like a garage or under a tree, the less time wax needs to dry successfully.

What Type Of Wax Is Used

Car wax typically comes in two forms; liquid or solid.  Though not universal, liquid car wax does not typically embed into a paint job as well as substance wax.  Because of this, liquid wax evaporates faster
and requires less rest time.  Usually about 10 minutes is the amount of time for one layer of wax to sit.  When using car wax that is in paste or balm form, it is wise to wait at least 20 minutes before adding anything else to the car, should you desire to.

How Many Layers Applied

In truth, the incorporation of wax should be a multi-tiered process if you want to garner the best results.  The first layer of wax on the vehicle’s exterior should always rest the longest, as the coat needs
to be retained before more is added.  With every successive layer of wax added, waiting between 5 and 15 minutes is prudent.  Keep in mind all of these time frames are only recommended for people wanting to finish the process as soon as possible.  To get the most out of your wax, doing your due diligence and taking your time is obviously far more advantageous.

Conclusion

To produce a perfect layer of protection with the precise amount of rest time, having a professional auto detailer wax your vehicle regularly throughout the year will deliver optimal results at an affordable cost.  Waxing too quickly is not only a mess, but a waste of time and energy better utilized by having a pro put their skills in effect and systematically layering each application appropriately on your ride.

Original article taken from The Detailing Syndicate https://detailingsyndicate.com/how-long-should-car-wax-sit/

Is Pressure Washing A Car Bad? Baton Rouge, LA

Pressure washing can be an efficient way to clear off your ride, but if wielded by a careless hand, can do more damage than its worth.  Most automobiles can handle the power of these types of washers in moderation, but only new makes and models can typically withstand its strength, provided the paint job has not been previously compromised.  That said, it is a myth that the newer the vehicle, the less careful you have to be when spraying with them.  A brand new exterior can be punished just as much as a car that is years old with flaking paint.  There are instances when pressure washing a car is not ideal, and they include:

 

“Do not make the mistake of assuming that a power washer is akin to placing your finger over the opening of your garden hose… These washers are designed for things like heavy machinery and clearing off patios and rock”

 

Direct Application From Up Close

The worst thing you can do with a pressure washer is place it a foot or less away from the body of a car.  The speed of the water is no joke, and has been known to damage even the toughest of paneling.  Do not make the mistake of assuming that a power washer is akin to placing your finger over the opening of your garden hose.  These washers are designed for things like heavy machinery and clearing off patios and rock.  The common denominator for these examples is that they are nowhere near as delicate as the paint job that rests on your vehicle.

Flaking Paint Is Not A Green Light To Pressure Wash

If your ride has paint that has seen better days, this is not an invitation to pressure wash.  Unless you have grand plans of completely overhauling the body, spraying even loose paint will frequently result in scratching.  This will give you two problems to deal with as opposed to one.  Pressure washers may be used on vehicles with flaky paint, but be sure to remove as much as you can by hand and car detailing clay before spraying these surfaces with liquid.  Moreover, when applied on aged paint, start with a lower setting on the washer.  You can always increase the speed of the stream, however you cannot undo your paneling taking a shot causing an indentation or scratch.

Choose An Environmentally Friendly Place

Pressure washing is not a good idea if it cannot be done on a concrete or similarly solid surface.  There are numerous reasons for this, the first of which is its environmental footprint.  Presumably during your wash, chemicals and cleaners will be utilized, so be mindful about where your stream is headed and whether such use is even allowed in your neighborhood.  Secondly, without a flat, forgiving surface to use a pressure washer, it will make a giant mess, especially with dirt and grass underneath.  Massive amounts of water can release from the nozzle in a short period of time, so do not bite off more than you can chew.

Conclusion

None of above listed reasons for when using a pressure washer is bad mean that it is not a worthwhile endeavor, but the truth of the matter is that a qualified and knowledgeable expert in auto detailing should be handling this task for you in a safe environment that allows for the maximum amount of positive effects on your car’s body and wheels.  Overall, using pressurized washers is only bad if done by someone inexperienced.

Original article taken from The Detailing Syndicate https://detailingsyndicate.com/is-pressure-washing-a-car-bad/

How Do Car Pressure Washers Work? Wichita – KS

Car pressure washers are a goldmine of ingenuity when it comes to providing thorough cleanings, and it is important to differentiate them between a standard flow of water and discover why they are so efficient.

Pump Vs. Valve

Any time you fire up the garden hose to wash your vehicle, in most cases you are simply opening up a valve that regulates the amount of water you can use at a given time.  This is why usually the flow itself leaves a lot to be desired and is not the most effective way to distribute water.  Pressure washers on the other hand, are essentially a pump that is compartmentalized in a transportable chamber.  An electric motor powers the pump, which gives it the ability to generate a massive amount of force and speed, depending on the model and brand being utilized.  Power washers use acceleration and pressure to their advantage by moving the liquid within the chamber at a higher rate than normal.  If you have ever had the misfortune of having your hand in front of a pressure washer you know that it is a lot stronger than someone spraying you with the hose.  The water inside the washer is typically sent through a thin rod and nozzle which allows it to distribute liquid so swiftly.

 

“Power washers use acceleration and pressure to their advantage by moving the liquid within the chamber at a higher rate than normal…. If you have ever had the misfortune of having your hand in front of a pressure washer you know that it is a lot stronger than someone spraying you with the hose”

 

Interior Components

Though a fairly simple device, knowing the parts of a pressure washer will help better illustrate its function.  The water inlet is what connects the unit to where it will be receiving its liquid.  Almost always there is a filter installed here to cut down on foreign elements and debris from entering the cleaning attachment.  If your washer is clogged the filter is the first place to check for problems.  It should be noted that not every pressure washer has the capability of handling detergents.  While most are water based, some foams and certain ingredients in cleaners can cause the nozzle to be stuffed up and ineffective.  This is particularly true of older pressure washers. Washers of yesteryear used gas, however most incorporate an electric component these days due to its ease.  Put simply, the juice provided to the washer powers the pump to work its magic.

The water pump is the heart and soul of every pressure washer, and does all the heavy lifting in its application.  The easiest way to understand how it works is to picture it both sucking and pushing repeatedly.  Water is sucked in by the source, and then energy is transferred to pushing it out of the nozzle.  Washers utilizing an electric power source is what allows this process to repeat quickly and effectively over and over.  Most pressure washers can handle almost 2 gallons a minute, so use sparingly unless you want a gigantic bill.

The hose attaches to the gun, rod, or whatever is dispersing the water.  This hose can handle high pressures by having multiple layers and usually being reinforced by wire mesh.  If you were to use a generic piece of tubing it would either fly off immediately or deteriorate in no time.  Pressure washer hoses should be able to take around 6,000 PSI with relative ease.

The rod or gun you use to spray the liquid is basically a valve you open every time you pull the trigger.  Because so much energy is stored when it is resting, upon releasing it, water shoots out at high speeds.  This allows for terrific force in clearing off your vehicle.

Conclusion

Pressure washers are a nice addition to any car cleaning lineup, but they should be controlled by specialists in auto detailing to guarantee they only retain its positive effects, and does not damage your car’s exterior.

Original article taken from The Detailing Syndicate https://detailingsyndicate.com/how-do-car-pressure-washers-work/

How To Protect Steering Wheel Leather – Indianapolis, IN

Because our hands are on the steering wheel 90 percent of the time, it stands to reason that it is one of the most frequently used areas of our car, but one few people perform restoration upon.  If not maintained, the leather will deteriorate, and beyond just aesthetic purposes, a worn down steering wheel can make for unsafe driving conditions when pertaining to a user’s grip.  Luckily there are ways to circumvent these issues, and they can be solved from a routine detailing of your interior.  This can be done by yourself, but it is highly recommended to let someone with extensive knowledge in the shelf life of car interiors and leather to solve the problem for you.  There are three basic factors to address in this protection process:

 

“The fastest way for you to stop your leather steering wheel from incurring damage is to block the sun’s rays from it as frequently as possible…. warm weather will make leather crack, and because of where the wheel rests in your vehicle, it is in direct view of the sun”

 

Shield From The Elements

The fastest way for you to stop your leather steering wheel from incurring damage is to block the sun’s rays from it as frequently as possible.  Warm weather will make leather crack, and because of where the wheel rests in your vehicle, it is in direct view of the sun.  Your car can be covered in numerous ways, the first of which is to consistently park it in a garage or under an awning.  Because we do not all have that luxury, utilizing a windshield visor is recommended.  They are very inexpensive and block harmful elements from adversely affecting the leather.  The last thing a car owner can do is put their vehicle under a polyester or weather-resistant cover.  For people that drive often this is not very practical, so typically this is a worst case scenario choice.

Pre-Wash Your Wheel

Using a microfiber towel, clean your steering wheel with interior vehicle grade detergent.  Remember, there are different types for steering wheels as opposed to ones that are just for the center cabin itself, so read the instructions to make sure its effects are what you desire.  Commonly found in sprays, a foam substitute is also worthwhile and can be spread liberally using an applicator pad.  A ‘pre-wash’ for your wheel will remove the oils and grease marks that we each leave every time we grip it.  The amino acids in our blood negatively react to leather, which is why it fades over time.

Restore The Leather

To recapture its soft feeling and reinvigorate its shine, apply a leather cleaner to the wheel itself.  This can be done by hand, towel, or best of all, a soft bristled toothbrush.  The reason a toothbrush works most efficiently in this application is because it will get to the root of the leather and make its texture smooth and durable again.  Leather detergents are found at any autobody shop, and occasionally they are referred to as ‘conditioners.’

Conclusion

The best way to restore your car’s steering wheel leather (amongst the myriad of other benefits) is to have it serviced regularly by professional auto detailers.  Experts can save faded wheels so effectively that a replacement is not necessary.  This is particularly fruitful for car owners looking to maintain the original leather as it was bought, and professionals can upgrade its components on the wheel to produce showroom-quality results.

Original article taken from The Detailing Syndicate https://detailingsyndicate.com/how-to-protect-steering-wheel-leather/

What Is An Automotive Detailer? Chicago – IL

Several people mistakenly think that with a sponge in one hand and a bottle in the other they are ready to detail a car efficiently.  The reality of the matter is that the importance of automotive detailers cannot be understated for not only their approach to the profession, but the techniques behind it as well.  Qualified individuals in this space sometimes have years of expertise under their belt, and have serviced hundreds of cars in their lifetime.  So what personifies an automotive detailer as opposed to a do it yourself  ‘weekend car washer’?

 

 

“The skill behind each process is a craft that takes time and plenty of practice to master… different bodywork necessitates different techniques to ensure that restoration is fulfilled to its highest potential”

 

Education

Auto detailing is an extensive task for a reason.  To perform it effectively is to be versed in all kinds of situations and potential problems you can run into on numerous types of vehicles.  Different makes and models require different cleaners and methods, and to overlook this is to play with fire as to what results you will ultimately achieve.  Understanding what is taking place and how it is creating a positive effect is half the battle in detailing.

Skill

Anyone who assumes detailing is nothing more than wiping a cloth on the exterior is sorely mistaken.  The skill behind each process is a craft that takes time and plenty of practice to master.  Different bodywork necessitates different techniques to ensure that restoration is fulfilled to its highest potential.  The effort displayed by detailers is usually only matched by their passion to complete a job well done.

Attention To Detail

Combining both the educative components of auto detailing with the skill involved to incorporate this knowledge brings an attention to detail that is necessary to guarantee the car has been properly serviced.  With so many nooks and crannies and various paints, chemicals and foams used, nothing can be glossed over if protection and cleanliness is to be maintained.  Professional automative detailers predict problems before they occur, and work to eradicate them through a plethora of methods like waxing, polishing, shampooing, and so on.  Moreover, they work to notify owners of any issues that could affect how well the car drives in the future. 

A Pro In More Than One Regard

A true detailer is also different than standard mechanics due to their commitment to an unrivaled degree of professionalism.  Obviously this is a part of being a maintenance man as well, however it is integral to how a detailer operates because just as much of the job is handling courteous customer service as it is cleaning, maintaining and restoring the vehicle. 

Conclusion

Finally, an automotive detailer is someone that promotes routine maintenance on a car well after their work is finished.  If done correctly, each expert has successfully set the table to allow the car owner to protect and manage the automobile on their own until another detailing appointment is prudent.  Often times those that bring in their cars to be serviced damage the work themselves by not understanding the elements involved in the process.  A detailer’s expertise is exemplified by their ability to communicate with each customer and educate them not only on what tasks were carried out on the vehicle, but why they are important as well.

Original article taken from The Detailing Syndicate https://detailingsyndicate.com/what-is-an-automotive-detailer/